FLAT RATE SHIPPING ONLY $12.95*

PC-Marine™ Putty Epoxy

Item# marine-putty-epoxy-pc
Unit Sizes: 
Quantity:
This item is currently out of stock!
PC-Marine™ Putty Epoxy
Description:
PC-Marine™ is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Marine™ putty epoxy is formulated to adhere to wet, dry, and submerged, underwater surfaces that are clean. Cut, mix and apply. It's that easy. PC-Marine™ epoxy allows a working time of about 15 minutes and cures for service in 60 minutes.

Repair: Holes in Fiberglass, PVC, Boats, Metal, Wood, Spas, Swimming Pools and more.

***Note: PC-Marine™ epoxy will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt.

Mixing:
Cut or twist off desired amount of epoxy. Mix by kneading putty with fingers until a uniform color is achieved. For ease of mixing warm putty to room temperature or above. Powder on hands (corn starch, baby powder) is helpful to minimize sticky epoxy contact before hardening begins.

*** Note: Use latex gloves to avoid any issues.

Tips:
For best results, surface should be cleaned and free of rust, dust, and oil. Solvents such as denatured alcohol can be used to remove most contaminants. Whenever possible, lightly sand or rough up the surface to improve adhesion of the epoxy putty. For a smooth, finished surface, hand rub with wet finger or cloth prior to cure. Denatured alcohol is excellent for smoothing, shaping, and forming of putty epoxy. PC Marine™ epoxy cures well even at cold temperatures (40°F). PC Marine™ epoxy is supplied in premeasured sticks. The texture of the putty is such that it is slightly tacky but does not stick aggressively to fingers. The putty holds its shape well and can be used in vertical and overhead applications.

Packaging:
Wrapped in Polyethylene film and protected on the ends with aluminum labels, the stick is doubly protected in an air tight clear plastic cylinder. The remaining portion of unused putty can be saved by placing the aluminum labels on the exposed end and put back into the cylinder.

Available in 2 oz (57g.) 3 1/2" stick and 4 oz (114g.) 7" stick.



PHYSICAL PROPERTIES
COLOR (component A) WHITE
COLOR (component B) GREEN
COLOR (mixed) WHITE
WORK TIME (70°F) 15 MINUTES
CURE FOR SERVICE 60 MINUTES
ELONGATION 1%
CONDUCTION (electric) NON CONDUCTIVE
THERMAL SHOCK EXCELLENT
TOXICITY NON TOXIC ONCE CURED
HEAT RANGE -20 to 200°F
TEST METHODS
TENSILE SHEAR STRENGTH ASTM D 1002 700 PSI
COMPRESSIVE YIELD ASTM D 695 12000 PSI
HARDNESS SHORED ASTM D 2240 75 (1wk)
HEAT DEFLECTION ASTM D 648 120°F


TECHNICAL DATA

Copyright © 2009 Epoxy Warehouse All Rights Reserved.
Store Design by SEOwhat